top of page

Tiger Tails

  • Writer: Jetter Conversions
    Jetter Conversions
  • Jun 12
  • 1 min read
Tiger tails for use with drain jetting hoses
2" and 3" Tiger Tails

Here at Jetter Conversions we stock a wide range of drainage equipment to help with your everyday needs whilst working out of a drainage van.


Our latest item to start stocking is the Tiger Tail.


What Is It Used For?:


The Tiger Tail is used in the mouth of a drain entrance or to go around a sharp edge that your jetting hose would usually be rubbing upon during jetting work, The reason these tiger tails are very useful in these situations is because if you let your hose rub on the mouth of the manhole then in no time at all you will start to rub the outer rubber layer of the hose off.


If the outer rubber of the hose is rubbed away it leaves exposed wires that can be very dangerous and sharp, Not only does this mean that you cannot feed the hose through your hands when entering or removing from a drain but it also means that there is increased risk of your jetting hose bursting.


Another big problem with exposed wires on your jetting hose is when you pull the hose out and get cut from the sharp nature of these wires there s a very high possibility of infection due to these hoses being in raw sewage and having many different types of bacteria on them.


Check out the Tiger Tails in our shop here: Tiger Tail | Jetter Conversions



Comentarios


bottom of page